Most espresso machines are made in Italy, Spain or Asia, but the Seattle area has become a center for American-built commercial espresso machines. All four makers here build their machines there, from hand-welded multi-boiler machines to super-automatics and under-counter systems.
An espresso machine's boilers, group heads and frame are most of its value, but its pumps, grinders and controls are often bought from European suppliers. Each listing is rated for the company's most American-made machines and names what is known to come from elsewhere.
Ranked by Made in USA level, highest first; ties are in alphabetical order. The level measures how much is made in the USA, not product quality. How the levels work
Synesso builds commercial espresso machines for specialty coffee shops, including the MVP Hydra and S-Series, with multi-boiler temperature control and pressure profiling. Mark and Sandy Schneiter started the company in their Seattle garage in 2004; Middleby has owned it since 2019, and it builds machines in Renton, Washington.
Synesso's home page says "Seattle Built since 2004," and Middleby's brand page says "Each machine is hand crafted to order here at our factory in Seattle." A dealer describes how "Synesso artisans form, weld, and finish every machine locally in the PNW," building "Steel frames, group tops, trays, and steam tanks" by hand.
Its 2025 owner's manual lists bought-in parts such as a Fluid-o-Tech pump (an Italian maker) and a Marathon motor. Where its controls and valves are made isn't stated.
Production history: founded in 2004 by Mark Schneiter, a former La Marzocco USA engineer, Synesso built its first machines in Seattle. Middleby bought it in 2019 and grouped it with Concordia in Middleby Coffee Solutions in 2021; its factory is now at 851 SW 34th Street in Renton.
Our rough estimate: imported or likely imported parts (pumps, motors, valves, controls) are about 20–35% of a machine's value.
Level 4 for its commercial espresso machines (MVP Hydra and S-Series): Synesso forms, welds and builds its espresso machines by hand near Seattle; its pumps and some other parts come from outside suppliers, some of them Italian.
Slayer Espresso makes commercial espresso machines with its needle-valve flow control, including the Espresso V3, Steam LP and EP, Steam Single and Single Group, plus the Dose grinder made with Mazzer. Jason Prefontaine founded it in Seattle; Italy's Cimbali Group has owned a controlling stake since 2017, and it is based in Renton, Washington.
Slayer's About page: "SLAYER designs and manufactures professional espresso machines for a discerning global clientele." Its own announcements describe its machines as "Assembled by hand in Seattle," and the Cimbali Group says its one US plant is "in Seattle, where Slayer-branded machines are manufactured."
A 2026 production manager posting describes about 40 employees and daily production at its headquarters. Import records show regular 2026 shipments of machined parts and plates from a Chinese precision-parts maker, and its pumps and controls are bought in.
Production history: Slayer has built its machines in Seattle since its early years (Gizmodo visited its Seattle shop in 2012) and later moved production to Renton; the Cimbali Group took a controlling stake in 2017.
Our rough estimate: imported parts (machined parts, pumps, controls) are about 40–60% of a machine's value.
Level 3.5 for its commercial espresso machines (Espresso V3, Steam and Single Group): Slayer hand-assembles its espresso machines in the Seattle area, using machined parts imported from China along with other bought-in parts.
Concordia Beverage Systems makes super-automatic, bean-to-cup espresso machines, including the Xpress Touch and Ascent Touch, for convenience stores, hotels and cafes. Founded in Seattle in 1989, it has been part of Middleby since 2014 and shares a factory with Synesso.
Concordia's Middleby shop page: "Concordia — Seattle Built Since 1989" and "we still design and build in Seattle. Same factory. Now sharing a floor with Synesso." Middleby's brand page says its machines are "designed, developed, and assembled at our Redmond, WA headquarters."
Import records for the shared Middleby Coffee Solutions plant show built-in grinders from Hemro in Germany and flow meters from Europe. Where its boilers, pumps and controls are made isn't stated.
Production history: Concordia was founded in Seattle in 1989 and says it invented the modern super-automatic espresso machine; Middleby bought it in 2014 and grouped it with Synesso in 2021, and the two now share a plant in the Seattle area (Renton).
Our rough estimate: imported parts (grinders, flow meters, pumps, controls) are about 50–70% of a machine's value.
Level 3 for its super-automatic espresso machines (Xpress and Ascent Touch): Concordia designs and assembles its super-automatic espresso machines near Seattle, using imported grinders and other bought-in parts.
Mavam Espresso makes commercial espresso machines whose boilers and pumps sit under the counter, leaving only slim brew towers on the bar, including its Under Counter and MACH series, MM super-automatic and Mavam Steam. The Seattle-area company is based in Tukwila, Washington.
Mavam's home page says its machines are "Manufactured in the Great Pacific Northwest." Daily Coffee News (2022) reported that "All Mavam machines are assembled in the United States," and dealers say it designs and assembles its machines in the Pacific Northwest.
Mavam doesn't say which parts it makes; its MM super-automatic uses Ditting grinder burrs from Switzerland, and its pumps and controls are bought in.
Production history: Mavam has built its machines in the Seattle area since at least 2015 and lists its shop at 12628 Interurban Ave S in Tukwila; no ownership change was found.
Level 3 for its under-counter and MACH espresso machines: Mavam assembles its espresso machines in the Seattle area; which parts it makes itself isn't stated.
Even US-built machines use European parts. Synesso's pumps come from an Italian maker, and Concordia's built-in grinders from Germany.
Owned abroad, built here. Slayer belongs to Italy's Cimbali Group and Synesso and Concordia to Middleby; all three still build their machines near Seattle.
"Built" can mean assembled. Concordia and Mavam describe their work as assembly; Synesso forms and welds its frames and tanks by hand.
Each listing's research notes show what was checked and when, including our rough estimate of how much of the value is imported. Ratings are rechecked as companies answer.
If you represent a listed company and think its description or Made in USA level is wrong, please send a correction, with a link to your source if you have one. The same form handles image changes and removal requests. Company names, logos and website previews belong to their owners and appear here only to identify the companies listed.
This site takes part in the Amazon Associates program and other affiliate programs, so some links earn us a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
* This site does not have any relationship, business or personal, with any of the manufacturers listed. Our only affiliations are with the affiliate programs described above.
A company may be based in the USA while making some products elsewhere. Check the manufacturer's own site for where a specific product is made.
