American kitchen knives come from century-old cutlery towns and from small modern shops: a Massachusetts factory that has made cutlery since 1818, a New York plant that has made Cutco knives since 1949, a Pennsylvania knife maker best known for its pocket knives, an Iowa company with cast aluminum handles, a family shop in Ohio that has hand ground its blades since 1902, and newer makers in Idaho and Oregon using powder steels.
A knife is mostly steel and the work done to it, so where the steel is melted and where the blades are heat treated and ground matter most. Each listing is rated for the company's most American-made line and names what is known to come from elsewhere.
Ranked by Made in USA level, highest first; ties are in alphabetical order. The level measures how much is made in the USA, not product quality. How the levels work
Cutco makes kitchen knives, steak knives, shears and knife sets with its Double-D serrated edge and thermo-resin handles, sold through in-home demonstrations, its stores and online. Founded in 1949 as a joint venture of Alcoa and Case, the company has made its knives at its factory in Olean, New York ever since.
Made in: Olean, NY (440A blades blanked, heat treated and ground, handles molded and riveted at its own factory).
Imported:German steel for its all-steel Stainless Table Knife (Cutco); a few gadgets such as its can opener, ice cream scoop and wine opener (not on this page).
Cutco's American Made page: "Cutco Knives have been made for more than 75 years at our factory in Olean, New York" and "All Cutco Knives are American made, and we are committed to keeping it that way." Its Petite Chef spec sheet reads "American Made," with a 440A high-carbon stainless blade and a thermo-resin handle.
Cutco's How Cutco Knives Are Made page describes blanking, a three-step heat treatment, hollow grinding and edge grinding, and handle molding in Olean. The Alliance for American Manufacturing (July 2025) reports about 390 factory workers and that Cutco buys its stainless steel from "two companies in Pennsylvania"; the mill that melts it isn't named.
Production history: made in Olean since 1949; owned by its managers since a 1982 buyout from Alcoa. In 2012 Cutco brought its stainless table knife production into Olean after its supplier, Sherrill Manufacturing, went into bankruptcy. A congressional factory visit in May 2025 and the 2025 AAM profile confirm production in Olean. No import records for the knives or legal actions on its Made in USA claims were found.
Our rough estimate: if the 440A steel is melted abroad, it would be about 15–25% of a knife's value; the handle resin is about 5%. Everything else is done in Olean.
Level 4.5 for its kitchen knives: Cutco blanks, heat treats and grinds its knives and molds its handles in Olean from steel bought in Pennsylvania; the mill that melts that steel isn't named.
Dexter-Russell makes professional knives for restaurants, meat and fish processing and home cooks, including its Sani-Safe line with white sanitary handles, Traditional wood-handled knives, V-Lo and SofGrip, plus turners, scrapers and industrial knives. Its roots go back to Henry Harrington's 1818 cutlery shop in Southbridge, Massachusetts and John Russell's Green River Works of 1834.
Dexter-Russell's Sani-Safe pages: "Proudly Made in the U.S.A." and "Designed and built in Southbridge, Massachusetts where we have been manufacturing cutlery for over 200 years," with a "proprietary DEXSTEEL high-carbon, high-alloy, stainless steel blade, individually ground and hand-honed." Its home page says "the vast majority of our knives and tools are made by about 250 skilled craftspeople in Massachusetts" and that it crafts "proprietary American steel blades."
2025–26 job postings for a heat treat furnace operator, blade finishing and handle fitting (hafting) in Southbridge confirm the blades are heat treated and finished there. The mill that makes DEXSTEEL and where the polypropylene handles are molded aren't named.
Production history: made in Southbridge since 1818 (as Russell Harrington from 1933, renamed Dexter-Russell in 2001). Part of the Hyde Group until 2010, now owned by the Hardy family's Affinity Group. Its Basics and iCut-Pro lines are made in China (Zoro and The Rational Kitchen); import records show knife shipments from China through 2025, which matches those lines.
Our rough estimate: if DEXSTEEL is melted abroad, it would be about 20–35% of a knife's value; the handle is 5–10%. At least 60% of the value is confirmed US work.
Level 4.5 for its Sani-Safe knives: Dexter-Russell heat treats, grinds and handles its Sani-Safe knives in Southbridge and calls its steel American, but the mill isn't named, and its Basics and iCut-Pro lines are imported.
Lamson makes kitchen knives, steak knives, spatulas, turners and barbecue tools, in lines such as Vintage Precision, Premier Forged and the Brad Leone Signature collection. Founded in Shelburne Falls, Massachusetts in 1837 as Lamson & Goodnow, it moved its factory to Westfield in 2015 and keeps its outlet store in Shelburne Falls.
Lamson's Vintage Precision collection is described as "USA Made Superior 420HC-LAM High-Carbon, High-Chromium Stainless-Steel," precision laser cut and heat treated to 58 HRC, and its Vintage 8 in. chef's knife page says it is "Crafted from premium USA steel and finished by hand in Massachusetts." Where the blades are heat treated and where the walnut and G-10 handle materials come from aren't stated.
Lamson's Premier Forged knives are "precision-forged from the finest high-carbon Grade 4116 stainless steel from Solingen, Germany," "finished by hand in Massachusetts," with "handles of exotic imported hardwoods and acrylics." The Rational Kitchen (2023) reports the forged blades are imported pre-made from Germany.
Production history: made in Shelburne Falls from 1837. Lamson & Goodnow filed for Chapter 11 in August 2014, was bought by private investors in 2015 and moved its factory to 79 Mainline Drive, Westfield, keeping the outlet store and one building in Shelburne Falls. A January 2025 machine operator job posting in Westfield shows production continuing there. Lamson's own site no longer says "made in USA" on its home page; it says "rooted in American craftsmanship."
Our rough estimate: for Vintage Precision, imported content is limited to handle materials and rivets, if any, about 0–15% of the value. For Premier Forged, the German forged blade and imported handle materials are about 40–60%.
Rating corrected from 4 to 4.5: the Vintage Precision steel and the cutting and finishing are confirmed US; the heat treat location and handle materials are unconfirmed, not known to be imported. Premier Forged is a separate line and no longer counts against it.
Level 4.5 for its Vintage Precision knives: Lamson cuts them from US-made steel and finishes them in Massachusetts; where they're heat treated and where the handle materials come from isn't stated. Its Premier Forged line uses German steel.
Rada Cutlery makes paring knives, slicers, cook's knives, steak knives and knife sets with cast aluminum or black resin handles, plus kitchen utensils and a hand-held sharpener. The company was founded in 1948 and has made its products in Waverly, Iowa since 1969.
Rada's kitchen knives page: "Our Made in the USA kitchen knives are manufactured in our one location in the heart of the United States, Waverly, Iowa." Its product pages say "Rada products are 100% American made – from raw materials through construction."
Rada says its handles are hand poured solid aluminum and its blades are T420 high-carbon stainless, hand sharpened and hollow ground. BladeAdvisor (2021) reports Rada's steel is "resourced right here in the states." The mill and where the blades are heat treated aren't named.
Production history: made in Waverly since 1969; launched its first retail-packaged line in fall 2024. One business directory says the founding family sold the company to St. Martin Holdings of Cedar Rapids in April 2024; this isn't confirmed elsewhere, and no change in production was reported.
Our rough estimate: if the steel were foreign, it would be about 15–20% of a knife's value; Rada says it isn't, so imported content is likely 0–5%.
Level 4.5 for its aluminum-handle kitchen knives: Rada casts its handles and grinds its knives in Waverly and says every material is American; the mill that supplies its blade steel isn't named.
Benchmade, best known for its folding and fixed-blade knives, makes a kitchen line of chef's, station, paring and slicing knives, steak and table knife sets, with CPM-154 stainless blades and Richlite or G10 handles. The family-owned company was founded in 1987 and has made its knives in Oregon City, Oregon since 1996.
Benchmade's cutlery page: "EST 1987 FROM OREGON CITY. Every knife we make is crafted in our Oregon City facility." Its Station Knife page lists CPM-154 stainless steel (58–61 HRC) and a Richlite handle, "FROM OREGON CITY, USA."
When the kitchen line launched in November 2020, Benchmade said it would be made "alongside all Benchmade knives and tools at their Oregon City, Oregon, facility." A 2021 factory tour describes blanks laser cut from bar, hollow ground, tempered, hand edged, polished and assembled there. Richlite handle material is made in Tacoma, Washington; where the G10 comes from isn't stated.
Production history: in Oregon City since 1996; AllAmerican.org says Benchmade brought its last overseas-assembled lines back to Oregon City in 2010, and its China-made budget lines have since been discontinued. CPM-154 was made by Crucible Industries in New York until it closed in 2025; CPM steels are now melted in Sweden by Erasteel or supplied by Carpenter, then rolled in New York. Benchmade doesn't say which source its current kitchen blades use. New kitchen models were launched in March 2026.
Our rough estimate: the steel, if now melted abroad, and the G10 are about 5–20% of a knife's value; the cutting, grinding, heat treating and assembly in Oregon City make up the rest.
Level 4 for its CPM-154 kitchen knives: Benchmade cuts, grinds, tempers and assembles its kitchen knives in Oregon City, but its CPM-154 steel has likely been melted abroad since Crucible closed in 2025, and it doesn't say where its G10 comes from.
W.R. Case & Sons Cutlery Co. is best known for its pocket knives, and also makes Household Cutlery kitchen knives with Tru-Sharp stainless blades and solid walnut handles: chef's, santoku, bread, slicing, boning and paring knives, steak knives and block sets. Case has made knives in Bradford, Pennsylvania since 1905 and has been owned by Zippo since 1993.
Made in: Bradford, PA (Household Cutlery made at its own factory "from domestic and imported materials").
Imported:some materials in its Household Cutlery, not named (Case labels the line "Made in USA from domestic and imported materials"); TecX sub-brand knives (not kitchen knives), made in China.
Case's 8 in. Household Cutlery chef's knife page (Tru-Sharp stainless, solid walnut handle, full tang) says: "Made in USA from domestic and imported materials." Case doesn't say which materials are imported.
Case says "Since 1889, every Case knife has been made with pride in the United States," with over 160 manufacturing steps and each blade "tempered and tested not once, but twice." A 2025 profile reports about 350 workers and 6,000 knives a day at the Bradford plant, which has its own heat treat department. A knife-steel database identifies Tru-Sharp as Latrobe 420HC, a US steel; Case doesn't confirm this.
Production history: made in Bradford since 1905, in its current factory since 1975; owned by Zippo since 1993. AllAmerican.org (November 2024) says only its TecX line is made in China. Import records show Case receiving knives and knife sets from Chinese suppliers through late 2025, not tied to the kitchen line. Target lists the 9-piece set as "Origin: imported" while describing it as made in the USA.
Our rough estimate: the unnamed imported materials (possibly the walnut, rivets or block) are about 10–25% of the value.
Level 4 for its Household Cutlery kitchen knives: Case makes its Household Cutlery in Bradford, Pennsylvania, but labels it made from domestic and imported materials without saying which are imported.
New West KnifeWorks makes chef's knives, santokus, bread, paring and steak knives in CPM S35VN powder steel, many with its colorful G-Fusion G10 handles, plus outdoor knives. Founder Corey Milligan started the company in Jackson, Wyoming; its knives are ground and finished at its factory in Victor, Idaho and sold through its own stores and website.
Made in: Victor, ID (blades ground, fitted with handles and finished at its factory; steel rolled, laser cut and heat treated by US contractors in New York and Pennsylvania).
New West's Made in the USA page: "All New West knives are made with U.S.A. steel at our production facility in Victor, Idaho," and its G10 handles are "100% U.S.A. made." Its 8 in. Chef page: "G-Fusion knives are made in the US with American steel."
New West's own process posts (2019) describe CPM S35VN steel from Crucible Industries in New York, hot rolled by Niagara Specialty Metals in New York, laser cut by a contractor, heat treated by Peters' Heat Treating in Pennsylvania, then ground and finished in Victor.
Production history: made in Jackson, Wyoming, then at its 10,000 sq ft factory in Victor, Idaho (sources give 2015 or 2019 for the move). Crucible Industries filed for bankruptcy in December 2024 and closed in 2025; Erasteel of France bought its CPM steel business, and S35VN powder is now melted and atomized in Söderfors, Sweden, then rolled by Niagara in New York. So knives made from new steel likely use Swedish-melted steel. A new chef's and bread knife release in November 2026 shows production continuing.
Our rough estimate: the steel is about 10–20% of a knife's value and is now likely melted in Sweden; the US rolling, heat treating, grinding and finishing make up most of the rest.
Level 4 for its G-Fusion chef's knives: New West rolls, heat treats, grinds and finishes its knives in the US, but its S35VN steel has been melted in Sweden since Crucible closed in 2025, so its "U.S.A. steel" claim may no longer hold.
Warther Cutlery makes chef's, paring, slicing, serrated and steak knives, cleavers and knife sets with hand-ground convex edges, hand-etched blades and layered birch handles, plus cutting boards and knife blocks. Mooney Warther made his first kitchen knife in 1902; the family business is now run by later generations beside the Warther Museum in Dover, Ohio.
Warther's story page: "Warther Cutlery knives are crafted from CPM MagnaCut steel and tempered to a Rockwell C 62.5–64. Each blade is hand-polished to a convex grind ... The handles are made of layered birch and carefully riveted." Its chef knife page calls each one "American-made."
Ohio Cooperative Living (2021) describes knives made one at a time by hand in Dover, with birch handles riveted onto the tangs, about 700 knives a week. Who heat treats the blades and who makes the layered birch handle material aren't stated.
Production history: made by the Warther family in Dover since the early 1900s; incorporated in 1954; the knife shop later moved across the street from the museum, still in Dover. CPM MagnaCut was made by Crucible in New York until it closed in 2025; it is now melted in Sweden by Erasteel and rolled in New York, so new Warther blades likely use Swedish-melted steel. Warther's old listing (CPM S35VN, Rockwell 58–60) is out of date.
Our rough estimate: the steel is about 10–20% of a knife's value and is likely melted abroad since 2025; the handle material is about 5%; the hand grinding and finishing in Dover make up most of the value.
Level 4 for its chef's knives: Warther grinds, finishes and handles its knives by hand in Dover, but its MagnaCut steel has likely been melted in Sweden since 2025, and who heat treats the blades isn't stated.
Best made in USA flatware from 2 American makers: 18/10 stainless forks, spoons, knives, place settings and serving pieces.
What "made in USA" means for kitchen knives
Every maker on this page cuts or grinds and finishes its knives in the US. What separates the ratings is the steel and the parts a company names, or doesn't:
The steel mill is rarely named. Most makers say their steel is American but don't name the mill that melts it, so even all-American claims can't reach a 5 until the mill is named.
A US steel maker closed in 2025. Crucible Industries of Syracuse, New York, which made the CPM powder steels (S35VN, MagnaCut, CPM-154) used by several premium makers, went bankrupt in December 2024 and closed in 2025. Its CPM steels are now melted in Sweden and rolled in New York, so "American steel" claims for knives made from new stock may no longer hold.
Read the label. "Made in USA from domestic and imported materials" means part of the knife comes from abroad, even when it's made here.
Some brands sell imported lines too. Several makers here also sell knives made in China or forged in Germany under the same name; check the line, not just the brand.
Each listing's research notes show what was checked and when, including our rough estimate of how much of the value is imported. Ratings are rechecked as companies answer.
Knife makers by type
Home kitchen knives and sets: Case Cutlery, Cutco, Lamson, Rada Cutlery
Premium chef's knives: Benchmade, New West KnifeWorks, Warther Cutlery
Lamson moved up to Level 4.5 for its Vintage Precision knives, which it cuts from US-made steel and finishes in Massachusetts. Its Premier Forged knives, made with German steel, are a separate line and no longer count against that rating.
What's changed since our last update on August 27, 2017?
3 makers were added:Benchmade, which makes its kitchen knives in Oregon City, Oregon; Case Cutlery, which makes Household Cutlery in Bradford, Pennsylvania; and New West KnifeWorks, which finishes its knives in Victor, Idaho.
Flatware and utensils have their own pages now: Liberty Tabletop moved to our flatware page, and Allegheny Treenware, Best Manufacturers and Vermont Rolling Pins moved to our cooking accessories page.
5 companies were removed: American Made Cutlery sells Rada's knives from Rada's address, so it is covered by the Rada listing; Sabaknife's website no longer belongs to the knife maker; no current US production was found for Lifetime Sterling; Jacob Bromwell's US-made kitchen items are sold out and its maker isn't named; and no current trace of Out of the Woods was found.
5 makers from the 2017 list were re-checked, including where each has made its knives over the years, and still make knives in the USA. Lamson moved its factory from Shelburne Falls to Westfield, Massachusetts in 2015, and its Premier Forged line uses German steel; Warther now uses CPM MagnaCut steel.
Every maker now has a Made in USA level from 0 to 5, with the sources and research notes behind it. See how the levels work.
Listings checked by Dave Hurley.
Know a USA-made company we missed?
If a company makes its products in the USA and is not listed, send us its website.
If you represent a listed company and think its description or Made in USA level is wrong, please send a correction, with a link to your source if you have one. The same form handles image changes and removal requests. Company names, logos and website previews belong to their owners and appear here only to identify the companies listed.
This site takes part in the Amazon Associates program and other affiliate programs, so some links earn us a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
* This site does not have any relationship, business or personal, with any of the manufacturers listed. Our only affiliations are with the affiliate programs described above.
A company may be based in the USA while making some products elsewhere. Check the manufacturer's own site for where a specific product is made.