American cooking accessories come from wood shops and metal shops: a Michigan bowl mill that has turned one-piece hardwood bowls for generations, a West Virginia couple who hand-shape cherry spoons, a Vermont woodturner and a Maine sawmill that turn rolling pins, an Illinois maker of butcher block cutting boards and the Vermont board and rolling pin maker it bought in 2025, Massachusetts and Iowa cutlery makers with stainless turners and utensils, an Iowa-made food chopper, a Portland whisk maker and a Washington forge that hammers pot racks.
For wooden tools the question is where the wood grows; for metal tools, where the steel is made and who cuts and forms it. Each listing is rated for the company's most American-made line and names what is known to come from elsewhere.
Ranked by Made in USA level, highest first; ties are in alphabetical order. The level measures how much is made in the USA, not product quality. How the levels work
Allegheny Treenware hand-shapes about 170 kinds of wooden kitchen utensils, from spoons, spatulas and flippers to tongs, scoops, measuring cups and salad servers, mostly in cherry with some maple, birch, beech and walnut. Stanley and Sue Jennings, former coal miners, started the business in 1990 and sell through craft galleries and their own shop.
Allegheny Treenware's site: "All items are MADE IN THE USA, with local WV hardwoods," "handmade from West Virginia hardwoods in our shop 10 miles east of Grafton, WV." Its main wood is cherry; maple, birch, beech and walnut are used for some orders. Each piece is wood burned on the handle with the species and the shop signature.
Inc. (2019) describes the process: a pattern is traced on a board, cut on a band saw, hollowed with a router, shaped with a hand gouge, sanded and soaked in oil. It reports that lumber is bought from local landowners and sawn on Stanley's own sawmill. The only other input is the mineral oil finish.
Production history: made at the Jenningses' Preston County farm shop since 1990; no sale or move found. Staff fell from about 12 in the early 2000s to 4 in 2019, so the business is small; in March 2025 the John C. Campbell Folk School began selling its pieces online, and in November 2026 its own online shop was open with shop hours posted.
Our rough estimate: imported content is about 0–2% (the finishing oil, at most).
Level 5 for its hand-shaped cherry spoons, spatulas and flippers: Allegheny Treenware shapes each utensil by hand in its Thornton, West Virginia shop from local hardwood the owners saw themselves.
Fletchers' Mill makes solid maple and cherry rolling pins, from French and tortilla pins to classic bearing pins with colored handles and a child's pin, plus pin cradles, muddlers, salt cellars and hardwood salt and pepper mills. It is the kitchen line of Maine Wood Concepts, a family wood-turning mill in western Maine.
Fletchers' Mill's French Rolling Pin page: "Crafted from solid rock maple. Made in Maine USA." Its classic pins are "Crafted from solid rock maple" or "solid cherry wood" with "precision steel ball bearings" and are "Proudly made in Maine, USA."
La Cuisine (2019) describes the company's own modernized sawmill with six kilns, with logs "purchased from local loggers" and shaped into boards, squares and dowels; its brand page says "From raw logs to the finished product the entire process is done in house." The French pin is one piece of wood with no hardware; where the bearings in its handled pins come from isn't stated.
Production history: the Fletcher family has owned the New Vineyard mill since 1971 (brothers Doug, Gary and Jody since 1994; company name Maine Wood Concepts). At the end of 2012 it bought the Vic Firth Gourmet line of pepper mills and rolling pins, which had been made in Newport, Maine, and moved it to New Vineyard as Fletchers' Mill. No sale or move since was found; in November 2026 its rolling pins and mills were in stock on its own site.
Our rough estimate: imported content in the French pin is about 0%; in handled pins, the bearings of unknown origin are about 2–8% of the value.
Level 5 for its solid maple French rolling pin: Fletchers' Mill turns its French rolling pin from one piece of Maine-grown maple that it saws and dries at its own New Vineyard mill.
Holland Bowl Mill turns solid one-piece wooden bowls in maple, cherry and walnut, from small salad bowls to chopping bowl sets and live-edge bowls, and makes cutting boards, serving boards, wooden utensils, rolling pins and cake stands from the same Michigan hardwood. The Gier family business celebrated 120 years in 2026, and visitors can watch the mill from its showroom.
Holland Bowl Mill's Our Story page: "Every bowl is turned by hand, finished in our facility, and shipped from the same building where it was made," at 120 James Street, and "The hardwoods we use are grown and harvested in the United States: primarily sugar maple, cherry, and walnut." Every product page reads "Handcrafted in Holland, Michigan and finished with Bee's Oil."
In a 2020 interview its owner described logs bought from local tree services and mills, steamed, dried and nest-turned in-house into one-piece bowls with "no adhesives, no glues," and the Bee's Oil finish mixed in-house. Its wholesale description names timber "harvested from forests throughout Michigan, Indiana and Ohio."
Production history: the company dates itself to 1906; the bowl mill began in 1984 and moved to 120 James Street in 2001; four generations of the Gier family, now led by Kory Gier. No sale or move found. Its 120th-anniversary events in August and September 2026 included live bowl turning at the mill.
Our rough estimate: imported content is about 0–2% (finish ingredients and packaging at most).
Level 5 for its one-piece hardwood bowls: Holland Bowl Mill turns its bowls by hand in Holland, Michigan from hardwood grown and harvested in the United States.
Vermont Rolling Pins hand-turns rolling pins in more than a dozen styles, from French, Shaker and modern pins to Belan, lefse, oklava, tutove and Italian pasta pins, plus pie and cake stands, each from a solid block of maple, cherry or walnut. Woodturner Ken Freeman and his wife Cyndi started the business around 2009.
Vermont Rolling Pins' The Wood page: "All of our woods are sustainably harvested and are from a Vermont millworker," in cherry, hard maple or walnut. Its home page: "hand turned, shaped from a solid block of maple, cherry or walnut hardwood" and "hand turned with love and made in the USA."
In an interview published around 2024, Ken Freeman said some of the maple is from Vermont and "The walnut and the cherry are from upstate New York and Pennsylvania, usually," and that the pins are finished with mineral oil and beeswax. He described turning about 20 pins a day in a shop next to his house.
Production history: turned in South Burlington since about 2009 (Boston magazine, 2014); demand jumped in 2020; no sale or move found. It is essentially a one-person shop. In November 2026 its site promised shipment within 3 to 7 days, and Heath Ceramics listed its French pins in stock.
Our rough estimate: imported content is about 0% (the oil and beeswax finish at most).
Level 5 for its hand-turned French and Shaker rolling pins: Vermont Rolling Pins turns each pin by hand in South Burlington, Vermont from US-grown maple, cherry and walnut bought from a Vermont millworker.
John Boos & Co. makes maple, cherry and walnut cutting boards and chopping blocks, butcher blocks, countertops, kitchen islands and carts, plus stainless steel foodservice equipment. Blacksmith Conrad Boos made the first Boos Block in Effingham, Illinois, and the company dates itself to 1887. In 2025 it bought Vermont board maker JK Adams.
Boos's Sustainability page says it sources "renewable, sustainable North American hardwoods like northern hard rock maple, American cherry, and American black walnut," and burns its scraps to power its glue press, heat its factory and dry lumber in its kiln. Its walnut boards are "Handcrafted from sustainable American Black Walnut," and its home page reads "Made in the USA from solid walnut wood." A Boos product insert says "We take pride in sourcing our hardwood lumber from NHLA affiliated lumber mills in the USA."
Boos doesn't say whether all its maple is grown in the US or partly in Canada; its board product pages we checked carry no "Made in USA" line. A third-party site reports some Boos pages reading "Made in the USA with domestic and imported materials"; we didn't find that wording on Boos's own site.
Production history: in Effingham since its start; a $16 million, 116,000 sq ft butcher block plant opened there in 2017, and in 2025 the company listed one plant of 370,000 sq ft with about 350 employees. In September 2025 it bought JK Adams of Dorset, Vermont, keeping that company in Vermont. No move abroad found.
Our rough estimate: for walnut boards, imported content is about 0–5% (finish and packaging); maple boards could be up to about 10% if some maple is Canadian.
Level 4.5 for its American black walnut cutting boards: Boos makes its walnut boards at its Effingham, Illinois plant from American black walnut bought from US mills; it describes its maple only as North American.
Lamson makes stainless steel turners, fish spatulas, scrapers, servers, spreaders, granny forks, shears and other kitchen tools with walnut or black POM handles, alongside its kitchen knives. Founded in 1837, it is one of the oldest cutlery makers in the US, and has worked from Westfield, Massachusetts since 2015.
Lamson's kitchen tool pages: "Meticulously crafted in the USA, each of our Walnut or Ultra Durable tools is finished to perfection using state of the art technology coupled with hand finishing," and "Made from American stainless steel with either elegant Walnut handles with brass rivets or sturdy Ultra Durable Black POM handles." Its turner specifications list 301 stainless and a country of origin of USA.
Lamson's FAQ places its factory at 79 Mainline Drive in Westfield, Massachusetts. Where its walnut and rivets come from isn't stated. Its Premier Forged knives use German steel, but that line is rated on our Cutlery page, not here.
Production history: in Shelburne Falls, Massachusetts until 2015, then Westfield; reorganized under Chapter 11 in 2014 and bought by local investors in 2015. A Westfield machine operator job was posted in January 2025. No move abroad found.
Our rough estimate: the walnut handle and rivets, whose origin isn't stated, are about 20–30% of a turner's value; the American stainless and Westfield work are the rest.
Level 4.5 for its walnut-handle turners and spatulas: Lamson makes its turners and spatulas in Westfield, Massachusetts from American stainless steel; where its walnut handles come from isn't stated.
Rada Cutlery makes stainless steel kitchen utensils, including spatulas, turners, pie servers, ice cream scoops, pizza cutters, peelers, tongs and non-scratch spoons and ladles, alongside its knives and sharpeners, and sells many of them through fundraisers. The company was founded in 1948 and has made its products in Waverly, Iowa since 1969.
Rada's utensil pages list "COUNTRY OF PRODUCTION USA," and its stainless utensils "come from quality 300 series high-nickel stainless steel and our always-sturdy Rada Cutlery handle. Made in the USA for dependable quality." Its non-scratch line says "Every one of our products is handcrafted in the heart of the USA, with materials only from America."
Rada casts its aluminum handles in Waverly. It doesn't name its steel mill or say where the utensil heads are stamped. Its online shop also sells sheet pans, dishcloths and prep boards marked "Country of Production USA," which Rada probably buys from other US makers.
Production history: founded in 1948, in its Waverly plant since 1969; in 2025 it bought Kwik-Kut and moved its chopper production to Waverly in 2026. A 2024 sale of the company to a Cedar Rapids holding company is reported by one aggregator but not confirmed. No move abroad found.
Our rough estimate: imported content is about 0–5% if the steel is American as Rada says; if the steel were imported, about 20–35%.
Level 4.5 for its aluminum-handle stainless utensils: Rada says its utensils are made in Waverly, Iowa with materials only from America and casts its own aluminum handles there; it doesn't name its steel mill.
Best Manufacturers makes stainless steel whisks (it calls them whips) and potato mashers for restaurants and home kitchens, more than 100 styles from 8-inch French and balloon whisks to 5-foot kettle whips, many listed by the National Sanitation Foundation. The Merrifield family has owned the company since 1959.
Best Manufacturers' site is headed "BEST WHIPS USA - AMERICAN MADE KITCHEN TOOLS," and its housewares catalog says "Unless otherwise stated all products are made in Portland Or." Its juicer page lists three cast aluminum citrus juicers and a tortilla press as "Made in Mexico."
Inc. (2018) describes employees using machinery "to cut tubing for handles and bend stainless steel wire into different shapes," and a nontoxic epoxy the company developed to seal the whisk heads. Best doesn't say where its stainless wire, handle tubing or wooden handles come from, and its brand text on Walmart mentions offering "products from Mexico, Germany and China."
Production history: owned by the Merrifield family since 1959 (John Merrifield sole owner since 2008); about 14 workers in a Northeast Portland factory in 2012 and 13 in 2018, near Portland's airport. No sale or move found; current dealer listings read "Handcrafted in Portland, Oregon, USA."
Our rough estimate: stainless wire and handle stock of unknown origin are about 20–35% of a whisk's value; forming, sealing and assembly in Portland are the rest.
Level 4 for its stainless steel French, balloon and flat whisks: Best Manufacturers bends and assembles its stainless whisks in Portland, Oregon; it doesn't say where its wire and handle stock come from, and it also sells a few imported tools.
Enclume makes hanging pot racks in hammered steel, stainless and copper, including oval, rectangle and low-ceiling racks with hooks, plus bookshelf and wall racks, utensil bars, cookware stands, carts and fireplace tools. The company has made racks since 1973 using French forge techniques; enclume is French for anvil.
Enclume's Our Story page: "Enclume is proudly made in the USA," and "We begin with Solid Carbon Steel, 304 Solid Stainless or Solid Copper. We Cut, Punch, Grind and Form it using the Forge with our traditional French Techniques and equipment." Its product pages read "Forged by our Skilled Craftsmen in the Pacific Northwest, USA" and, for some racks, "Authentic USA Hammered Steel ... NOT imported."
Its shop also has an "Imported Products" section: the Rack It Up line of racks and hooks and a standing desk converter, each marked "Imported." Enclume doesn't say which mill makes its steel or where its chains and ceiling hardware come from, and a few racks use tigerwood, a South American wood.
Production history: making racks since 1973; AllAmerican.org (February 2026) places production at its facility in Port Hadlock, Washington. No sale or move found.
Our rough estimate: for an all-steel rack, steel stock and chain and ceiling hardware of unknown origin are about 15–30% of its value; the forge work in Washington is the rest.
Level 4 for its hammered steel oval ceiling pot racks: Enclume cuts, forms and finishes its steel pot racks at its Washington forge; it doesn't name its steel mill or hardware sources, and it sells a separate imported line.
JK Adams makes wooden rolling pins, cutting and carving boards, serving and charcuterie boards, pastry boards and wine racks, and also sells kitchen goods and Vermont foods from other makers. It has worked in Dorset, Vermont since 1944. Illinois board maker John Boos & Co. bought it in September 2025 and kept the company in Dorset.
JK Adams' About page: "American made since 1944," "we source hardwood from North American forests and manufacture all of our products in Dorset, Vermont," and "More than 50 pairs of hands touch each cutting board before it arrives in your kitchen–from local loggers and sawmill owners, to our factory-employees here in Dorset." Its rolling pins are described as "North American hardwood."
JK Adams says only "North America" for its wood, which can include Canada. Its online store also sells other brands (Nora Fleming, Nordic Ware, Opinel and others), which aren't part of this rating.
Production history: in Dorset since 1944; John Boos & Co. bought the company on September 17, 2025 and said it would keep the Dorset headquarters and staff. No move found.
Our rough estimate: if some of its hardwood is Canadian-grown, that could be about 10–30% of a pin's or board's value; otherwise imported content is near 0%.
Level 4 for its hardwood rolling pins and cutting boards: JK Adams makes its rolling pins and boards at its Dorset, Vermont factory; it describes its hardwood as North American rather than American.
Kwik-Kut makes hand food choppers with a round stainless steel blade and aluminum handle, the serrated Tooth Edge and the Plain Edge, used for chopping fruit, nuts and vegetables, mixing egg and tuna salad and cutting biscuits. The brand dates from the 1920s in upstate New York. Rada Cutlery of Waverly, Iowa bought it in 2025 and moved production to Iowa in 2026.
Rada's Kwik-Kut page: "In 2025, Rada Cutlery proudly acquired Kwik-Kut Manufacturing," and "Every Rada and Kwik-Kut product is proudly designed, crafted, and packaged in the USA." Both choppers have "an aluminum handle and a stainless steel blade."
The Rome Sentinel reports that production in Mohawk, New York ended on March 31 and the machinery was trucked to Iowa by the end of April, with Rada sourcing from US suppliers. Rada hasn't published how the choppers are made in Waverly or which mill supplies the blade steel.
Production history: started in a garage in Ilion, New York in the 1920s, in Mohawk from 1955 (owner Mary Morse made every handle herself in 2017); sold to Rada in 2025; moved to Waverly, Iowa in spring 2026. Rada sold Kwik-Kut-made choppers under its own name before the sale.
Our rough estimate: blade steel of unknown origin is about 10–25% of a chopper's value; the rest is US work and aluminum claimed as US.
Level 4 for its Tooth Edge and Plain Edge food choppers: Rada says its Kwik-Kut choppers are made in the USA with US materials, after moving production from New York to Iowa in 2026; it hasn't published how they are made there or where the blade steel comes from.
Wood is the most American material in the kitchen. Four of these makers turn or shape their goods from wood grown and harvested in the USA, often bought from local loggers or mills.
Steel sources are rarely named. The metal tool makers cut and form their tools here but seldom say which mill makes their steel or wire.
Some brands also sell imported goods. Enclume and Best Manufacturers each sell a separate line of imported items, and one woodenware store we checked mostly resells other makers' goods, so we left it out.
Each listing's research notes show what was checked and when, including our rough estimate of how much of the value is imported. Ratings are rechecked as companies answer.
Cooking accessory makers by state
Illinois: John Boos & Co. (Effingham)
Iowa: Kwik-Kut, Rada Cutlery (Waverly)
Maine: Fletchers' Mill (New Vineyard)
Massachusetts: Lamson (Westfield)
Michigan: Holland Bowl Mill (Holland)
Oregon: Best Manufacturers (Portland)
Vermont: JK Adams (Dorset), Vermont Rolling Pins (South Burlington)
Washington: Enclume (Port Hadlock)
West Virginia: Allegheny Treenware (Thornton)
Change log
What's changed since our last update on December 11, 2015?
5 makers were added:Holland Bowl Mill, which turns hardwood bowls in Holland, Michigan; JK Adams, which makes rolling pins and boards in Dorset, Vermont; Kwik-Kut, whose food choppers are now made in Waverly, Iowa; Lamson, which makes stainless turners and spatulas in Westfield, Massachusetts; and Rada Cutlery, which makes stainless utensils in Waverly, Iowa.
3 makers moved here from our cutlery page: Allegheny Treenware, Best Manufacturers and Vermont Rolling Pins.
2 companies were removed: no current trace of Kentucky Cutting Boards or WonderTop was found.
3 makers from the 2015 list were re-checked, including where each has made its products over the years, and still make them in the USA. Fletchers' Mill has made rolling pins in New Vineyard, Maine since 2013, and John Boos bought Vermont board maker JK Adams in 2025.
Every maker now has a Made in USA level from 0 to 5, with the sources and research notes behind it. See how the levels work.
Listings checked by Dave Hurley.
Know a USA-made company we missed?
If a company makes its products in the USA and is not listed, send us its website.
If you represent a listed company and think its description or Made in USA level is wrong, please send a correction, with a link to your source if you have one. The same form handles image changes and removal requests. Company names, logos and website previews belong to their owners and appear here only to identify the companies listed.
This site takes part in the Amazon Associates program and other affiliate programs, so some links earn us a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
* This site does not have any relationship, business or personal, with any of the manufacturers listed. Our only affiliations are with the affiliate programs described above.
A company may be based in the USA while making some products elsewhere. Check the manufacturer's own site for where a specific product is made.