Screw Drivers
Sizes:
Slotted: 1/8" thru 3/8" blades.
Phillips: #0 thru #4 tips.
2 3/8" thru 8" shafts.
Cellulose Acetate Handles, Fluted Grip; Beryllium Copper, Non-Sparking, Non-Magnetic and Corrosion Resistant.
For use where flammable or combustible vapors, liquids, dust or residue are present.
Non-Magnetic for use near highly sensitive magnetic equipment; Mri And Clean Room environments.
Screw Drivers & Bits
Sizes:
Ball End: SAE .050" thru 3/8" / Metric 1.5mm thru 10mm.
Torx Tip: T6 thru T40.
Nut Drivers: SAE 3/16" thru 1/2" / Metric 6mm thru 13mm.
Ergonomic design with a non-slip grip and two component handles with tough inner core and cushioned rubber exterior.
Burr free tool tips help tools seat fully in screw head.
Precision machined tips transfer more torque to the screw and reduces stripping.
Broad contact surface provides deep lobe engagement.
Straight, vertical sidewalls increase tool engagement and virtually eliminates cam-out.
Insulated Screw Drivers & Nut Drivers
Angled - Bare-Head - DriveHandle® and Regular Nut Drivers.
Cabinet Tip - Combo Head - Phillips Tip and Regular Screw Drivers
Also Hex Ball Tip - Holding Screw - Magnetic Tip - Mechanics Tip - Robertson and Torx Tip Drivers.
Sizes:
Cabinet & Mechanics Tips: 3/32" thru 3/8" blades - 3/4" thru 20" lengths.
Phillips Tips: #00 thru #4 tips - 2 1/2" thru 20" lengths.
Robertson Tips: #0 thru #3 / 4" - 6" - 8" lengths.
Hex Ball Tips: 3/16" 1/4" 5/16" by 6" length.
Torx Tips: T8 thru T55 by 5" length.
Nut Drivers 3/16" / 4mm by 3" length thru 3/4" / 13mm by 6" length.
Cementex’s double-insulated 1000V safety tools and personal protective equipment meet the requirements of OSHA, NFPA 70E and CSA Z462 standards.
Screw Drivers
Multi-Bit - Phillips Tip - Torx & Slotted Tip Screw Drivers
Sizes:
Slotted Tips: 1/8" thru 5/16" blades - 1 1/2" thru 8" lengths.
Phillips Tips: #000 thru #3 tips - 1 1/2" thru 8" lengths.
Torx Tips: T4 thru T30 - 1 1/2" thru 5" lengths.
Square Recessed #0 thru #4 - 3" & 4" lengths.
CHANNELLOCK screwdrivers are equipped with precision-machined vacuum heat-treated tri-alloy steel blades for durability and have a non-porous, coated finish for lasting corrosion resistance.
The high-torque, reinforced handles include a part indicator for easy identification, and tips are precision-machined for a proper fit on fasteners with superior control.
Screw Driver Bits
Phillips Tip - Star/Torx - Slotted - Hex - Bristol/6 Spline - Crosspoint/JIS - Robertson & Torx Security Tips
Sizes:
Slotted Tips: 1/8" thru 3/8".
Phillips Tips: P1 thru P4.
Star/Torx Tips: S/T6 thru S/T40.
Hex Tips: .050" / 1.27mm thru 5/16" / 8mm.
Robertson CMR-61 thru CMR-63.
Crosspoint/JIS Tips: CP1 & CP2.
Security Torx T8 thru T30.
Chapman precision mills their screwdriver bits on modern equipment that hold tight critical tolerances and produce screwdriver bits with sharp corners, flat ends and no burrs to fit straight and snug into fastener heads.
They are heat treated to specific tolerances and then finished with a rust inhibitor black oxide coating.
Their mini-ratchets are punched from USA stainless steel, hand assembled, inspected and tested.
Screw Drivers & Bits
Slotted - Phillips - Torx - Hex
Screw Driver Sizes:
Slotted: 1/16" thru 1/4 - 2" thru 4" lengths.
Phillips: #0000 thru #3 - 2" thru 4" lengths.
Driver Bit Sizes
Slotted Bits: .120" thru .420".
Phillips Bits: #0 thru #3.
Torx Bits: T10 & T15.
Hex Bits: 1/8" thru 3/16".
Chromium-Vanadium Blades: The square shanked blades are hardened to R/C 52-56 and constructed of USA 8650 Chromium-Vanadium steel alloy with a black oxide finish while backed by their Forever Guarantee not to twist or chip.
All driver bits are made of S-2 Tool Steel and properly hardened for strength and durability. Each bit fits snugly in the spinner that is securely assembled to their classic Grace USA wood handle for positive grip.
Screw Drivers & Nut Drivers
Screw Driver Sizes:
Slotted: 1/16" thru 7/32".
Phillips: #000 thru #3.
Torx: T10 thru T30.
Square Recess: #0 thru #3.
Shaft Lengths: 1 1/2" thru 20".
Nut Driver Sizes:
SAE: 3/16" thru 9/16".
Metric: 4mm thru 11mm.
Shaft Lengths: 1/1/2" thru 18".
Klein screwdrivers come with Cushion-Grip™ handle allows for greater torque and comfort. The integral flanges inside handle provide solid, twist resistant blade anchor. Special heat treated shafts and precision machined tips for exact fit.
Klein nut drivers have full hollow shafts that facilitates work on stacked circuit boards or other long bolt applications. They are premium chrome-plated for smooth feel and corrosion resistance. The handle end is color coded for easy identification.
Screw Drivers
Sizes:
Slotted: 3/16" thru 3/8" blades - 1 1/2" thru 12" shafts.
Phillips: #1 thru #3 tips - 3" thru 6" shafts.
Screwdrivers have rust and corrosion resistant finish chrome vanadium steel blades and user friendly industrial design fluted plastic grips.
Their square shank screwdrivers allow you to quickly and conveniently apply an adjustable, or other style, wrench to the shank of the screwdriver for additional torque.
All drivers meet or exceed ANSI/ASME standards and specifications for hardness and torque
Screw Drivers & Nut Drivers
Screw Driver Sizes:
Slotted: 1/16" thru 3/8" blades - 1 1/2" thru 24" shafts.
Phillips: #00 thru #4 tips - 1 1/2" thru 24" shafts.
Torx: T5 thru T45 tips - 1 1/2" thru 8" shafts.
Torx Security: T8 thru T25.
Square Recess: #0 thru #4 - 3" thru 8" shafts.
Nut Driver Sizes:
11/32" thru 1/2" - 3 & 3 1/2" shafts.
Mayhew screwdrivers have ergonomic acetate trilobe handle for maximum strength and torque transfer. All blades are manufactured using tempered high alloy steels that are heat treated and tempered to the perfect combination of hardness and strength. Each tip is precision CNC machined to industry specifications with tight tolerances for sure and reliable fastener engagement.
Mini-Screw Drivers & Nut Drivers
Screw Driver Sizes:
Slotted: .025 thru .157 blades.
Phillips: .055 thru .156 tips.
Torx: T1 thru T10/TR-20 tips.
Hex; SAE: .028 thru .125 / Metric: .7mm thru 3.0mm.
JIS: 1.5mm thru 4.0mm tips.
Tripoint: #000 thru #1 tips.
Pentalobe: P2 & P5 tips.
Nut Driver Sizes:
SAE: 3/32" thru 1/4".
Metric: 2.0mm thru 6.0mm
From Classic jewelers screwdrivers to state-of-the-art ESD safe hand tools, Moody has your miniature tool needs covered.
Screw Drivers & Nut Drivers
Snap-on produces a wide range of drivers, with all their Instinct® brand tools being made in the USA.
Screw Driver Sizes:
Slotted: 1/8" thru 1/4" blades.
Phillips: #0 thru #4 tips.
Torx: T8 thru T45 tips.
Hex; SAE: 1/8" thru 3/8" / Metric: 2mm thru 10mm.
Square tip: #0 thru #3.
Dzus®: Small & Large.
Nut Driver Sizes:
SAE: 3/16" thru 1/2".
Metric: 5mm thru 13mm
Shaft lengths: From Stubby to Extra-Long.
Soft grip handles have a wide tri-lobe design in the center of the handle that provides increased comfort and control while resisting most shop solvents.
Round neck and six specially designed curves and flutes provide fingertip control, aid in spinning and prevent the tool from rolling on flat surfaces.
Special alloy steel blades supply turning power, while the nickel-chrome plating helps protect against corrosion and promotes easy cleanup.
Screw Drivers
Snap-on produces a wide range of drivers, with all their Instinct® brand tools being made in the USA.
Sizes:
Slotted: .025" thru .120" blades.
Phillips: #0 & #1 tips.
555 Jewelers' Screwdrivers
These screwdrivers are ideal for fine, delicate work. They feature swivel knobs are concave to fit the finger, hexagonal knobs to prevent rolling, and a knurled grip. The overall length of screwdrivers is approximately 3-3/4" (95mm). Replaceable blades available as listed.
The 551 Screwdrivers with soft-touch handle are lightweight and ergonomic. The blades are made of chromium-vanadium steel, hardened and chrome-plated, allowing them to hold up well in the toughest applications. They feature precision-machined tips for top quality and exact fit, vapor-chromed non-slip tips that are hardened for maximum durability, tapered handles allow rapid rotation, and swivel knobs that are concave to fit finger.
Screw Drivers & Nut Drivers
Screw Driver Sizes:
Slotted: 1/8" thru 5/16" blades.
Phillips: #0 thru #3 tips.
Torx: T10 thru T30 tips.
Hex; SAE: 5/64" thru 5/16" / Metric: 1.5mm thru 8mm.
Square tip: S1 thru S3.
Nut Driver Sizes:
SAE: 3/16" thru 1/2".
Metric: 6mm thru 10mm
Shaft lengths: Stubby - Standard - Long.
AISI 8650 Steel Blades With Strong Ni-Cr-Mo alloy hardened to HRC 52–56
Polypropylene Handle With Reinforced with calcium carbonate for dimensional stability, Shore D 68 durometer.
Overmolded Grip With Soft thermoplastic elastomer (TPE), Shore A 80 durometer.
Screw Drivers & Nut Drivers
Screw Driver Sizes:
Slotted: 1/8" thru 3/8" blades.
Phillips: #0 thru #4 tips.
Shaft lengths: 1 1/2" thru 8" long.
Nut Driver Sizes:
SAE: 3/16" thru 9/16".
Metric: 4mm thru 11mm
Hollow shaft allows access to nuts on long threaded screws.
Available in Square & Round Shank - Square shank allows for turning with a wrench. Shanks are manufactured from tempered, high-alloy steel with a rust preventive, black oxide finish.
Handles are Rugged and made of acetate. Tri-lobe ergonomic design for maximum strength & torque transfer. Ribs on the neck allows easy fingertip control with a no-slip grip.
This is our 'rating system' that was used to score the above brands, which is based on whether the origin of the the parts and materials used in their assembly are sourced domestically or internationally. The quality and quantity of the components were not taken into consideration.
The fact is the fewer parts a product contains, the greater likelihood of achieving a higher score. Ultimately a high or low rating does not directly represent the overall quality of a particular item.
Any brands marked with a gold star shows that at least one product, or all of that companies products are made in the USA using virtually 100% domestic sourced materials & labor.
A silver star shows their products are assembled and/or machined in America using domestic labor and a mix (of any proportion) of both domestic and imported materials.
A bronze star shows that their products are assembled in the U.S. using all imported parts.
An 'empty star' indicates that the product is designed or engineered in the US, and/or some of the parts have been produced here, but are sent elsewhere to be assembled into a final product.